Introduction
The EWP Licence training course is focused on your EWP ticket for elevated work platforms over 11mtrs. This is the required Elevated Work Platform licence for the National High-Risk Work (HRW) Licence.
EWP course assessment occurs over three days. Our highly experienced EWP trainers will support a broad range of EWP skills for varied tasks and safety measures, and this formal training presents an amazing opportunity for workers and students to develop their knowledge, skills and employability. By choosing nationally recognised elevated work platform training courses from an award-winning RTO, you can be confident that we have the best specialist trainers and facilities to make your learning a really engaging and positive experience!
Course Dates
- UOC: TLILIC0005 - Licence to Operate a Boom-Type Elevating Work Platform
- Cost: From $695
- Duration: 3 days
- Funding Available
Book now
| Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
| 01/12/2026 | 03/12/2026 | 08:00 am - 04:30 pm | CHINCHILLA | 2 | $990.00 | ||
| 12/01/2027 | 14/01/2027 | 08:00 am - 04:30 pm | CHINCHILLA | 7 | $990.00 | ||
| 06/04/2027 | 08/04/2027 | 08:00 am - 04:30 pm | CHINCHILLA | 8 | $990.00 | ||
| 27/07/2027 | 29/07/2027 | 08:00 am - 04:30 pm | CHINCHILLA | 8 | $990.00 | ||
| 19/10/2027 | 21/10/2027 | 08:00 am - 04:30 pm | CHINCHILLA | 8 | $990.00 |
| Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
| 25/11/2026 | 27/11/2026 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 27/01/2027 | 29/01/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 08/03/2027 | 10/03/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 19/04/2027 | 21/04/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 31/05/2027 | 02/06/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 12/07/2027 | 14/07/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 23/08/2027 | 25/08/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 05/10/2027 | 07/10/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 15/11/2027 | 17/11/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 13/12/2027 | 15/12/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 |
| Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
| 01/12/2026 | 03/12/2026 | 08:00 am - 04:30 pm | CHINCHILLA | 2 | $990.00 | ||
| 12/01/2027 | 14/01/2027 | 08:00 am - 04:30 pm | CHINCHILLA | 7 | $990.00 | ||
| 06/04/2027 | 08/04/2027 | 08:00 am - 04:30 pm | CHINCHILLA | 8 | $990.00 | ||
| 27/07/2027 | 29/07/2027 | 08:00 am - 04:30 pm | CHINCHILLA | 8 | $990.00 | ||
| 19/10/2027 | 21/10/2027 | 08:00 am - 04:30 pm | CHINCHILLA | 8 | $990.00 |
| Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
| 25/11/2026 | 27/11/2026 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 27/01/2027 | 29/01/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 08/03/2027 | 10/03/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 19/04/2027 | 21/04/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 31/05/2027 | 02/06/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 12/07/2027 | 14/07/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 23/08/2027 | 25/08/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 05/10/2027 | 07/10/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 15/11/2027 | 17/11/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 | ||
| 13/12/2027 | 15/12/2027 | 08:00 am - 04:30 pm | TOOWOOMBA | 8 | $990.00 |
ENQUIRE NOW
Introduction
Course Details
Price
From $695
Duration
3 days
Locations
Refresh
N/A
Delivery Methods
- Classroom
- On-site
- In-person
- Groups
Unit Of Competency
TLILIC0005 - Licence to Operate a Boom-Type Elevating Work Platform
Training Prerequisites
As you are aware, a High-Risk Work Licence is required to operate a scissor lift or boom lift over 11 metres in length. The measurement is based on the vertical distance from the floor of the elevated work platform to the surface supporting the elevated work platform. The platform is at its maximum height and nominal reach, measured horizontally from the centre point of rotation to the outer edge of the platform in its most extended position.
Since boom lift EWPs can be telescopic, hinged or articulated, plus any combination of these, the risks and training requirements increase, so successfully completing this course is mandatory if you need to subsequently apply for your high-risk licence.
The training topics and practical assessment completed during the licence component of the scissor lift training are shown below. Depending on your location, our EWP course assessment varies. To view each location’s specifics, use the drop-down menu at the top of this page to view the locally relevant content. In summary, this EWP Licence training is focused on the over 11 mtr Licenced only. It is conducted over 3 days (TLILIC0005).
EWP Under 11 mtr training is available on a public course schedule and for groups – Information about the EWP under 11mtr Training Ticket ONLY for EWP’s under 11 mtrs can be found here EWP Training for Under 11 mtrs.
During this licenced work platform EWP ticket training for scissor and boom lifts 11 mtrs and over, you will learn about theoretical and practical topics, including the following:
- Appropriate mathematical procedures to estimate loads
- Conducting routine checks and pre-operational checks
- Best operating practices, including control measures and hazard prevention
- Emergency procedures and safety equipment, including the use of safety harnesses, PPE (like safety boots), energy absorbers, lanyards and anchor points
- Assessing ground conditions to confirm the site is suitable to extend and travel on with the elevated work platform
- Communicating with other workplace personnel and complying with workplace health & safety (WHS) and occupational health & safety (OHS) licensing legislation
Identifying problems and equipment faults and appropriate response procedures - Operating and controlling elevating work platforms, including all functions to their maximum extension within the safe working (rated) capacity
- Positioning, stabilising, set up of EWPs, including the use of outriggers/stabilisers and packing
- Handling emergencies involving motors, people, power lines, etc
- Recording and maintaining accurate information relating to operating elevating work platform
- Shutting down scissor lifts and EWP equipment safely and in accordance with manufacturer specifications and workplace procedures
- Stabilising, using and interpreting manufacturer specifications and data
It is important you understand that EWP training itself does not give you your high-risk licence. However, assuming you successfully complete your EWP assessment, you have 60 days to apply (and be assessed) for your High-Risk Work Licence.
Currently, you have to renew your licence within 12 months of its expiry; otherwise, your High-Risk Work Licence can’t be renewed. You will have to repeat this formal training course and re-apply for your licence or re-enrol in the course again and be supervised by somebody who has a current licence for the same class.
Following the successful completion of this nationally recognised EWP yellow card training course, you will receive a certificate that indicates the Statement of Attainments as recognised under the Australian Qualifications Framework. This is a nationally recognised training certification. The Statement is issued by us, Harness Energy (RTO 40521), and will give students the knowledge, skills and ability to safely operate scissor lifts and other EWP equipment.
The EWP Course ‘Statement of attainment’ is for the Nationally Accredited Units of Competency:
- TLILIC0005 Licence to Operate a Boom-Type Elevating Work Platform (boom
length 11 Metres or More)
The certificate is usually needed as evidence for your employer for safety and compliance requirements. You have 60 days to apply for a High-Risk Work licence – see linked application information below.
Note: Supersedes and is equivalent to TLILIC2005 – Licence to operate a boom-type elevating work platform (boom length 11 metres or more)
Course Prerequisites
Bring valid physical ID – (please refer to https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/apply-renew-or-replace-licences/evidence-of-identity for more information) with you to the day of training and the day of assessment. Wear suitable PPE, including closed-in shoes. All equipment is provided. Review the general important information (relevant to ALL courses) contained in Important Course Requirements.
Additional Information
Roles & Industries for EWP Ticket Training |
||
Jobs
|
Industries
|
Relevancy
|
Frequently Asked Questions
This is the elevated work platform course that enables you to operate elevating work platform machinery. This course delivers the knowledge required to help you get your High-Risk Work (HRW) Licence for EWPs over the 11mtr max boom lift length. You and your employer do need to know how to safely operate elevating work platform machinery, including a vertical lift, scissor lift, or elevating work platform.
Workers will also need to comply with a range of WHS requirements to safely operate elevating work platform machinery, and these tickets are part of that, making this essential industry training if you are planning on operating EWPs on the job site.
For those working in a job or industry that requires a HRW licence, the TLILIC0005 delivers the relevant knowledge and skills while enabling you to apply for the HRWL over 11 mtrs – which is a requirement to operate these higher EWPs.
The RIIHAN301E – which operates a boom-type elevating work platform (boom lift length below 11 metres), and TLID3035 – which operates a boom-type elevating platform, are not subject to the same High-Risk Work Licence requirements. After this training assessment is completed, you will be able to apply for the relevant HRWL.
Downloads
Important supporting information for Conducting Lifting Operations Training
Related Courses
Australian Training Awards
Queensland Winner – Small Training Provider of the Year 2022 | National Finalist and Silver Award Winner 2022
Funding Options
| Funding Program | Available* |
|---|---|
| Career Boost | ❌ |
| Career Start | ❌ |
| Construction Skills Queensland (CSQ) | ✅ |
| Manufacturing Skills Queensland (MSQ) | ✅ |
*Eligibility rules may apply and other funding options may be available to you, depending on your industry and/or course. Important information explaining the common course funding options listed above along with additional information is available on the Important Information page.
Combine To Save!
Working At Heights + Rescue
- PUAFIR210 – Prevent injury
- PUASAR022 – Participate in a Rescue Operation
- RIWHS204E – Work safely at heights
- PUAEME001 – Provide emergency care
