Rigging Licence – Basic Level – RB – Gladstone

During the Rigging Basic Licence Training course in Gladstone you will cover the following topics and practical activities:

 Plan task

• Review task instructions
• Compliance with WHS and workplace requirements
• Equipment inspection, use, maintenance and storage
• Manage Hazards, Risks and Environmental issues
• Moving, and placing tools, equipment and materials to minimise risks
• Identify required rigging equipment and associated gear
• Calculate loads
• Identify Communication Methods

Select and inspect equipment

• Select risk controls equipment and PPE
• Select and inspect rigging equipment and asociated gear
• Select and Check Communication Equipment

Set up task

• Establish and maintain communication with relevant personnel
• Ensure risk control measures and equipment are in place
• Assess ground suitability
• Ensure structure is suitable for load bearing task

Undertake basic rigging activities

• Erect and dismantle structures and plant .
• Erect structural steel
• Installing Pre-Cast Panels
• Installing a Static Line .
• Installing a Safety Net
• Installing a Materials Hoist
• Setting Up a Mast Climber
• Installing Shutters and Perimeter Safety Screens
• Installing Cantilevered Crane Loading Platforms
• Setting Up a Winch for Load Movement
• Assemble and erect lifting or pulling devices
• Move load to required destination and secure in position

Complete task

• Remove excess materials from work area
• Inspect structures, plant and equipment
• Inspect and Store All Rigging Equipment after Use
• Remove Hazard Control Measures

It is important you understand that licence-focused training itself does not give you your high risk licence. However, assuming you pass your Rigging assessment you have 60 days to apply (and be assessed) for your high risk work licence.

Currently, you have to renew your licence within 12 months of its expiry otherwise your high risk work licence can’t be renewed, you will have to repeat this training course and re-apply for your licence or re-enrol in the course again and be supervised by somebody who has a current licence for the same class.

Upon successful completion of this course, a nationally recognised Statement of Attainment for the following unit of competency will be issued:

CPCCLRG3001 Licence to perform rigging basic level

NOTE: Statement of Attainment will be issued by Harness Energy RTO 40521

Resits – If you are required to resit, resit-specific fees are $500pp.

Competency in this unit does not in itself result in a licence. Participants are only eligible to apply for a High-Risk Work Licence in the specific state or territory where they have:

• Completed their training, and
• Are eighteen (18) years of age, and
• Have completed the minimum logbook hours or training record, and
• Have passed the mandated national assessment instrument, and
• Have met any other state or territory work health and safety (WHS) criteria.

A licensing fee is payable to the relevant state or territory jurisdiction for those students wishing to apply for a High-Risk Work Licence (class RB).