Introduction
This one day course will teach you how to weld polyethylene (PE) plastic pipes using butt welding method and relevant if you are in a factory or field setting.
Course Overview
Course Dates
- UOC: PMBWELD301E - Join polyethylene plastic pipelines using butt welding
- Cost: From $$550
- Duration: 1 Day
- Funding Available
Book now
Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
18/11/2024 | 18/11/2024 | 07:30 am - 03:30 pm | Perth | 4 | $549.00 | ||
16/12/2024 | 16/12/2024 | 07:30 am - 03:30 pm | Perth | 8 | $549.00 |
Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
30/01/2025 | 30/01/2025 | 08:00 am - 04:30 pm | TOOWOOMBA | 12 | $550.00 | ||
08/05/2025 | 08/05/2025 | 08:00 am - 04:30 pm | TOOWOOMBA | 12 | $550.00 | ||
18/09/2025 | 18/09/2025 | 08:00 am - 04:30 pm | TOOWOOMBA | 12 | $550.00 |
Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
18/11/2024 | 18/11/2024 | 07:30 am - 03:30 pm | Perth | 4 | $549.00 | ||
16/12/2024 | 16/12/2024 | 07:30 am - 03:30 pm | Perth | 8 | $549.00 |
Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
30/01/2025 | 30/01/2025 | 08:00 am - 04:30 pm | TOOWOOMBA | 12 | $550.00 | ||
08/05/2025 | 08/05/2025 | 08:00 am - 04:30 pm | TOOWOOMBA | 12 | $550.00 | ||
18/09/2025 | 18/09/2025 | 08:00 am - 04:30 pm | TOOWOOMBA | 12 | $550.00 |
Introduction
Course Details
This butt welding course includes the theoretical and practical components to meet the skills and knowledge required to undertake polyethylene welding (also known as poly welding) using butt welding equipment.
Participants will gain the following skills and knowledge:
- Identifying materials being used in the installation as compatible for welding using butt welding methods
- Calculating appropriate welding parameters to be used
- Maintaining and calibrating welding equipment
- Performing welding
- Assessing quality of welded joints made
Training and assessment is conducted at Harness Energy Training facilities. Optionally, training and assessment can be conducted at the premises of industry clients providing there are suitable industry training facilities.
Upon successful completion of this course, a nationally recognised Statement of Attainment for the following unit of competency will be issued:
PMBWELD301E Join polyethylene plastic pipelines using butt welding
*Students undertaking the Perth course will need to contact an external party to obtain their Butt Welding stamp.
NOTE: Statement of Attainment will be issued by Competency Training Pty Ltd (RTO 31299)
Course Prerequisites
This course is suitable for those who are required to use a butt welder to form butt welds on polyethylene (PE) pipes and fittings. Participants may be involved in the installation and maintenance of pipelines transmitting gas and liquids, as well as those working in the mining sector.
A basic to moderate English language, literacy and numeracy skill level is required.
All participants are required to wear the following minimum PPE to enter our facilities:
- Fully enclosed shoes (steel-capped boots preferred)
- Long-sleeve shirt with high visibility
- Long work pants
Additional PPE may be required depending on the course requirements.
Please also review the general important information (relevant to ALL courses) contained in Important Course Requirements
Enquiry | Group Discounts
Combine To Save!
Working At Heights + Rescue
- PUAFIR210 – Prevent injury
- PUASAR022 – Participate in a Rescue Operation
- RIWHS204E – Work safely at heights
- PUAEME001 – Provide emergency care