Introduction
The Intermediate Rigging Licence training, based here in Perth, is for you once you have your Basic Rigging course successfully completed along with any required basic work experience as an actual Rigger. This Perth based, Intermediate level Rigging course takes you to the next level using the comprehensive in-house tools, equipment and trainers. It is on this Intermediate rigging training course where you will learn rigging work involving hoists with jobs and self-climbing hoists, cranes, conveyors, dredges and excavators, tilt slabs, demolition of structures and multiple fits. The overall course is consistent with the other rigging courses in that the focus follows a planning, equipment selection, task set up and actual activitieis including erecting and dismantling.
This is the required training to subsequently go on and apply for your high risk work licence (HRWL) Class RI.
Course Overview
Course Dates
- UOC: CPCCLRG3002 - Licence to perform rigging intermediate level
- Cost: From $999
- Duration: 4 Days
Book now
Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
12/11/2024 | 15/11/2024 | 07:30 am - 03:30 pm | PERTH | 5 | $999.00 |
Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
12/11/2024 | 15/11/2024 | 07:30 am - 03:30 pm | PERTH | 5 | $999.00 |
Introduction
Course Details
This intermediate rigging Licence course includes the theoretical and practical components to meet the skills and knowledge required to be able to perform the duties of an intermediate rigger for the high-risk work licence class RI. This means being able to do:
- Anything that a basic rigger can do PLUS
- Erection of cranes,
- Conveyors, dredges and excavators.
- Erection of tilt-up panels.
- Erection of jib hoists and self-climbing hoists.
- Demolition work.
- Dual and multiple lifts.
You also get to undertake this training in amazing facilities – right here in Perth – with the kind of instructors that make the learning both valuable and really relevant to your work.
Overall, this intermediate level rigging licence course covers more involved aspects of the Rigger’s job and involves substantial practical components. Key aspects of the course include:
Plan Job
Risk Managements
Identify Equipment and Communication Methods
Select and Inspect Rigging Equipment
- Equalising Gear
- Associated Equipment
- Select and Inspect Associated Plant and Equipment
- Flexible Steel Wire Rope
- Inspection of Associated Plant and Equipment
Inspect Safety Equipment
Select and Check Communication Equipment
Set Up for the Task
- Apply Hazard Control Measures
- Check Ground
- Review Site Information
- Determine Forces and Loads
- Fit Safety Equipment
Erect Structures and Associated Plant
- Lifting and Installing Concrete Panels
- Calculations for Tilt-Up Panels
- Planning to Install Tilt-up Panels
- Specific Requirements for Tilt-Up Panel Erection
- Lifting and Fixing Panels
- Erecting a Non-Guyed Light Tower
- Tower Cranes
- Internal Climbing Tower Cranes
- External Climbing Tower Cranes
- Lattice Boom Cranes
- Coordinating Multiple Crane Lifts
- Calculations for Multiple Crane Lifts using Equalising Gear
Demolishing Structures
- Felling Columns and Members
- Felling Techniques
- Cutting and Removing Beams
Dismantling Structures and Plant
Inspecting the Completed Work
Tidy the Work Area Incidents and Emergency Response
Conclude Rigging Operations
It is important you understand that licence-focused training itself does not give you your high risk licence. However, assuming you pass your Rigging assessment you have 60 days to apply (and be assessed) for your high risk work licence.
Perth High Risk Licence Applications Additional Support Options Available please check them out here – Rigging Licence – Intermediate – Perth
Perth-based applicants – High Risk Licence Applications Additional Support Options Available:
- OPTION 1 – New Licence – New HRWL Application Fee – $90 (GST Free) + Processing Fee – $49 + GST + Passport Photos – $10 + GST
- OPTION 2 – Existing Licence / Update – Existing HRWL Application Fee – $45.10 (GST Free) + Processing Fee – $49 + GST
- OPTION 3 – You opt to apply for your licence directly – no additional fees apply.
Currently, you have to renew your licence within 12 months of its expiry otherwise your high risk work licence can’t be renewed, you will have to repeat this training course and re-apply for your licence or re-enrol in the course again and be supervised by somebody who has a current licence for the same class.
Upon successful completion of this course, a nationally recognised Statement of Attainment for the following unit of competency will be issued:
CPCCLRG3002 Licence to perform rigging intermediate level
NOTE: Statement of Attainment will be issued by Competency Training Pty Ltd (RTO 31299)
Resits – If you are required to resit, resit-specific fees are $500pp.
Competence in this unit does not in itself result in a licence. Participants are only eligible to apply for a High Risk Work Licence in the specific state or territory where they have:
- Completed their training, and
- Are eighteen (18) years of age, and
- Have completed the minimum logbook hours or training record, and
- Have passed the mandated national assessment instrument, and
- Have met any other state or territory work health and safety (WHS) criteria.
A licensing fee is payable to the relevant state or territory jurisdiction for those students wishing to apply for a High Risk Work Licence (class RB).
Course Prerequisites
This course is suitable for those who have dogging and and basic rigging experience and intend to work with steel structures or equipment on active worksites, whether from a sentry or stand-by position. Participants will be required to review task instructions and Safe Work Method Statements (SWMS), calculate loads and communicate with others. A moderate English language, literacy and numeracy skill level is required.
Participants must be over eighteen (18) years of age to undertake the mandated national assessment instrument, and must be able to provide a current High-Risk Work Licence and Statement of Attainment for the following unit of competency as a pre-requisite for undertaking this course:
CPCCLRG3001 Licence to perform rigging basic level
RB Rigging basic
CPCCWHS1001 – Prepare to work safely in the construction industry
All participants are required to wear the following minimum PPE to enter our facilities:
- Fully enclosed shoes (steel-capped boots preferred)
- Long-sleeve shirt with high visibility
- Long work pants
Additional PPE may be required depending on the course requirements.
Please also review the general important information (relevant to ALL courses) contained in Important Course Requirements
Enquiry | Group Discounts
Combine To Save!
Working At Heights + Rescue
- PUAFIR210 – Prevent injury
- PUASAR022 – Participate in a Rescue Operation
- RIWHS204E – Work safely at heights
- PUAEME001 – Provide emergency care