Introduction
Our CN Crane Licence Training – Non-slewing mobile CN Crane over 3 tonnes – is structured to provide you with the skills and knowledge you need to safely operate either this specific type of crane – over 3 tonnes or Plant Equipment with jib attachments resulting in over 3 tonnes lifting. This is the first key Crane LIcence training required for HRWL Licence purposes.
Course Overview
Course Dates
- UOC: TLILIC0040 - Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
- Cost: From $1599 - 1680
- Duration: 4 Days
Book now
Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
11/11/2024 | 15/11/2024 | 08:00 am - 04:00 pm | Perth | 1 | $1,599.00 | ||
25/11/2024 | 29/11/2024 | 08:00 am - 04:00 pm | Perth | 6 | $1,599.00 | ||
09/12/2024 | 13/12/2024 | 08:00 am - 04:00 pm | Perth | 3 | $1,599.00 |
Start Date | End Date | Time | Location | Avail. Spaces | Course Cost | Self Funded | Multi Enrolments |
11/11/2024 | 15/11/2024 | 08:00 am - 04:00 pm | Perth | 1 | $1,599.00 | ||
25/11/2024 | 29/11/2024 | 08:00 am - 04:00 pm | Perth | 6 | $1,599.00 | ||
09/12/2024 | 13/12/2024 | 08:00 am - 04:00 pm | Perth | 3 | $1,599.00 |
Introduction
Course Details
This CN Crane Licence Course – non-slewing mobile crane – 3 tonne plus – involves the theoretical and practical components to meet the skills and knowledge required to operate a non-slewing mobile crane, or plant with Jib attachment, with a Maximum Rated Capacity (MRC) exceeding 3 tonnes safely, in accordance with all relevant legislative responsibilities. Non-slewing mobile cranes are mobile cranes that incorporate a boom or jib that cannot be slewed including:
- An articulated mobile crane
- A locomotive crane
- A Plant machine that has a jib attachment that has a capacity to lift 3 tonnes or more.
Training and assessment is conducted at our world class and spacious Harness EnergyTraining facilities. Upon arrangement, training and assessment can be conducted at the premises of industry clients providing there are suitable industry training facilities.
The CN Crane Licence Training – Non-slewing Mobile Crane – 3 tonne plus course covers the following key areas of learning:
Planning Work and Task
- Working Safely – Health and Safety Rules, Regulators
- Codes of Practice, Australian Standards, Duty of Care
The Work Task
- Operation Surface Confirmation – Check Ground Conditions & Stabilising the Crane
- Lift Plan – Details, Hazards, Lift,Sketch,Commodity Weights, Rigging Plan
- Path of Movement Assessment
Hazards and Risk Management
- Communication Procedures
- Plant and Equipment Identification
Preparing for Work and Task
- Task Confirmation
- Workplace Consultation
- Risk Controls Implementation
- Crane Access
- Crane Pre-Start Checks – including Boom Checks, Tyres, Lifting Hook, Sheaves, Drums, Wedge Sockets, Lifting Equipment, Natural and Synthetic Fibre Ropes, Flexible Steel Wire Ropes, Chains, Check Communication Equipment
Crane Setup and Configuration
- Operational Checks
- Weather and Work Environment Assessment
- Crane Logbook
- Load Assessment
- Crane Capacity and Calculations
- Slinging Techniques
- Load Destination
Perform Work /Task
- Review Work Plans & Information
- Boom/Jib and Hook Block Positioning
- Connecting to the Load including Slinging a Load, Load Factors and Slinging
- Test lifts
- Load Transfer
- Communication Signals
- Landing the Load
Prepare to Drive an Articulated Mobile Crane
- Restraining of Items on Crane Body
- Operate the Crane
- Boom and Fall Block Positioning – including Two-Blocking and Articulating Cranes
Drive an Articulated Mobile Crane
- Starting, Driving, and Positioning
- Mobile the Load
- Monitoring the Load Movement
- Review Route of Travel
- Braking System including Parking Brake, Holding Brake ,Service Brake, Retarder Control, Understanding ARC and Engine Compression Brake
- Steering
- Driving Hazards including Defective Limiting Device, Abnormal Noises and Movements, Defective Computer or Visual Display, Unstable Crane or Load
- Emergency Management
Pack Up
- Stow and Secure Equipment
- Apply motion locks and brakes
- Shut Down and Secure Crane
- Carry out Post-Operational Checks
- Recording and Reporting Damage and Defects
Applying for a Licence to Operate a Non-Slewing Mobile Crane (CN)- Important Information
It is important you understand that this licence-focused training itself does not give you your high risk licence. However, assuming you pass your non-slewing mobile Crane assessment (over 3t) you have 60 days to apply (and be assessed) for your high risk work licence.
Perth High Risk Licence Applications Additional Support Options Available for Perth-based applicants:
- OPTION 1 – New Licence – New HRWL Application Fee – $90 (GST Free) + Processing Fee – $49 + GST + Passport Photos – $10 + GST
- OPTION 2 – Existing Licence / Update – Existing HRWL Application Fee – $45.10 (GST Free) + Processing Fee – $49 + GST
- OPTION 3 – You opt to apply for your licence directly – no additional fees apply.
Currently, you have to renew your licence within 12 months of its expiry otherwise your high risk work licence can’t be renewed, you will have to repeat this training course and re-apply for your licence or re-enrol in the course again and be supervised by somebody who has a current licence for the same class.
Upon successful completion of this course, a nationally recognised Statement of Attainment for the following unit of competency will be issued:
TLILIC0040 Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
NOTE: Statement of Attainment will be issued by Harness Energy RTO 45021
Competence in this unit does not in itself result in a licence. Participants are only eligible to apply for a High Risk Work Licence in the specific state or territory where they have:
- Completed their training, and
- Are eighteen (18) years of age, and
- Have completed the minimum logbook hours or training record, and
- Have passed the mandated national assessment instrument, and
- Have met any other state or territory work health and safety (WHS) criteria
A licensing fee is payable to the relevant state or territory jurisdiction for those students wishing to apply for a High Risk Work Licence (class CN).
Course Prerequisites
This course is suitable for those who are required to operate a non-slewing mobile crane a crane of greater than 3 tonnes.
A moderate English language, literacy and numeracy skill level is required.
Participants must be over eighteen (18) years of age to undertake the mandated national assessment instrument.
All participants are required to wear the following minimum PPE to enter our facilities:
- Fully enclosed shoes (steel-capped boots)
- Long-sleeve shirt with high visibility
- Long work pants
Additional PPE may be required depending on the course requirements.
Please also review the general important information (relevant to ALL courses) contained in Important Course Requirements
Enquiry | Group Discounts
Combine To Save!
Working At Heights + Rescue
- PUAFIR210 – Prevent injury
- PUASAR022 – Participate in a Rescue Operation
- RIWHS204E – Work safely at heights
- PUAEME001 – Provide emergency care